Florida Hardwood Floors top banner
blank
home
products
Flooring
finishes
adhesives
abrasives
molding
fasteners
sundries
Tools
Stair Parts
showroom
resources
floor care
janka
hardwood grades
species
about us
contact us
standards
 


www.mapei.com

  • Ultrabond 980 – Solvent-free, no-water, moisture curing urethane adhesive. Use on pre-finished or unfinished engineered flooring, parquet, bamboo, acrylic impregnated wood, laminated plank or ceramic tile. Coverage: 40-45 sqft/gal. with V-Notch trowel (3/16” wide x 5/32”).
  • Planipatch Plus – A self-curing, cement based patching system with superior bonding properties. Can be used as an embossing leveler or a patch over properly prepared vinyl sheet, VCT, cement terrazzo and residential cutback adhesive.


www.bostik-us.com

  • Bostik’s Best – The industry’s top selling urethane adhesive. A one-part, no-water, moisture cure urethane adhesive. Recommended for engineered, acrylic impregnated flooring, solid plank-flat milled shorts, bamboo, cork and parquet. Contains antimicrobial protection which inhibits growth of bacteria, mold or mildew. Coverage: 40-45 sqft/gal. with V-Notch trowel (3/16” wide x 5/32”).
  • EFA – Engineered Flooring Adhesive is a high quality single component, moisture cure urethane adhesive designed for dimensionally stable flooring such as engineered and 5/16” parquet. Designed to tear-away much easier than other urethanes, contains no water or chlorinated solvents. Coverage: 40-45 sqft/gal. with V-Notch trowel (3/16” wide x 5/32”).
  • BST Urethane – Represents the latest breakthrough in urethane technology with unsurpassed green strength and ridge holding abilities. Contains no water and reduces sub floor moisture vapor transmission. Coverage: 40-45 sqft/gal. with V-Notch trowel (3/16” wide x 5/32”).
  • MVP – Moisture Vapor Protection is an elastomeric moisture cure urethane membrane designed to reduce moisture vapor transmission from the sub-floor, and create a noise reduction barrier over the substrate. Contains antimicrobial protection, and can be used over concrete, plywood, particle board, vinyl, ceramic tile or terrazzo. Coverage: 40-45 sqft/gal. with V-Notch trowel (3/16” wide x 5/32”).
 
adhesives
 

 

Florida Hardwood Floor Supplies     
5407 W. Crenshaw St. Tampa, FL. 33634
    Tel. (813) 514-2335  -  Fax (813) 514-2336

info@floridahardwood.net

nwfa logo

Home | Stair Parts | Showroom | Floor Care | Hardwood Species | Flooring | About Us | Contact Us | Our Standards of Conducts

Copyright © 2007 Florida Hardwood Floor Supplies. All rights reserved.